The Piaget 2 is the latest revision of the previous version of the Malibu. It was designed for the pilot with the sole purpose of performing 3D aerobatic maneuvers, constructed of 10mm high impact resistant EPP foam; it is ideal for practicing 3D stunts and maneuvers time after time. The Piaget 2 has a very clean and tidy look. It can be flown indoors and outdoors. The assembly process is very easy and straight forward and can be built within 30 minutes to an hour. The Piaget 2 is made of special EPP material which has good crash resistance and is easy to build and maintain. With its moderate size it?s very easy to carry. Tech One has cut small gaps at the hinges of aileron, elevator, and rudder to reduce the resistance when the control surfaces move to reduction the load on the servo.

Specifications:
Wingspan: 844mm ( 33.2 in.)
Overall Length: 920mm ( 36.22 in.)
Flying Weight: 210-230g ( with battery )
Recommended Battery: 2S 7.4V 500-1000 Mah

Require to fly:
1x 4-6 Channel Radio system
1x 2S 7.4V 500-1000 Mah
1x LI-PO Lipo Charger
3x 8g micro servo
1x AT 2206-V2 1500V motor
1x 10 amp Speed Controller
1x GWS 9x5 prop