The Piaget 2 is the latest revision of the previous version of the Malibu. It was designed for the pilot with the sole purpose of performing 3D aerobatic maneuvers, constructed of 10mm high impact resistant EPP foam; it is ideal for practicing 3D stunts and maneuvers time after time. . The 1500KV motor and 10amp speed controller provided excellent power for all your 3D stunts. The Piaget 2 has a very clean and tidy look. It can be flown indoors and outdoors. The assembly process is very easy and straight forward and can be built within 30 minutes to an hour. The Piaget 2 is made of special EPP material which has good crash resistance and is easy to build and maintain. With its moderate size it?s very easy to carry. Tech One has cut small gaps at the hinges of aileron, elevator, and rudder to reduce the resistance when the control surfaces move to reduction the load on the servo.

Specifications:
Wingspan: 844mm (33.2 in.)
Overall Length: 920mm (36.22 in.)
Flying Weight: 210-230g (with battery)
Prop Size: GWS 9x5
Motor Size: AT 2206-V2 1500V
Speed Control: 10 Amp
Servo: 8g*3 micro servo
Recommended Battery: 2S 7.4V 500-1000 Mah

Require to fly:
1x 4Channel Radio system
1x 7.4v 2S 400mAh-500mAh LI-PO Lipo
1x LI-PO Lipo Charger